An expansion tank is
one of the most important pieces of equipment that are required in the heating
and cooling systems. If the system fails to work in an emergency, then you have
to wait for hours before the technician or a technician comes for your rescue.
An increase in the temperature from the room can affect the whole house and
also create troubles for you. This equipment is usually placed in the attic,
basement, or any other part of the house that receives high temperatures during
the winter season. The water is heated and added to the main supply in order to
provide hot water to all the rooms in the house and make them comfortable. But,
this process must be completed at regular intervals, because if the water is
not heated, then you may have to face problems like the malfunctioning of the
heater, burst pipes, and electricity overloads.
The main purpose of
this equipment is to hold a large amount of water in a secure and controlled
manner. It is made up of two tanks, one for cold water and the other for warm
water. If the system fails to function properly due to a low level of water in
the storage tank, then it could cause damage to the walls, floors, ceiling, and
furniture in the house. The entire equipment weighs around 15 tons. You can see
the water rising to the top of the tank by simply opening the valve on the top
of the tank, and that too under pressure.
One of the main disadvantages
of using the air-source tank is that the operation costs are very high.
Therefore, people prefer to use the refrigerant tanks for the home. The
refrigerant tanks are much cheaper than the expansion tanks. But, there are
also some points of difference between these two tanks. The primary difference
lies in the fact that the expansion tank is used to store hot water, while the
refrigerant tank stores cold water. Another major difference is that the
refrigerant storage tanks must be connected to the house central heater.
In case of the
expansion tank, you can store warm water into it and then transfer the same
into your house through pipes. The only thing that you need to do in such a
scenario is that you cannot leave the water in the expansion tank for more than
a month. In case of the storage tank, you have a choice as to whether you
should connect it to the house central heater or not.
This article is
provided for information purposes only. Please consult an expert in the field
if you have any questions regarding your heating requirements or your plumbing
problems. The author is not liable for any consequences resulting from
information obtained from this article. Please follow any tip given in this
article only after consulting a qualified professional.
No comments:
Post a Comment